skip to content »

Wbr 1310 not updating firmware

wbr 1310 not updating firmware-89

We would not recommend this device for larger-scale office deployments.

wbr 1310 not updating firmware-66wbr 1310 not updating firmware-59wbr 1310 not updating firmware-50wbr 1310 not updating firmware-53

Back to Top Current Status: Compatible Suggestions: Suitable for 1-3 phones Comments: There are no known issues with this router although it is best used for smaller offices (1-3 phones).If this router has issues with phones not ringing, the issue may be UDP sessions being closed early.Our staff have resolved this by upgrading to firmware, then going to the hidden page at https://(router LAN IP)/f_general_and then changing the UDP Timeout from 30 seconds to 300 seconds.We would not recommend this router for larger-scale deployments.Back to Top Current Status: Compatible Suggestions: Suitable for 1-2 phones Comments: This router is compatible and suitable for 1-2 SIP phones.Should you have additional information on a device and would like to add your findings to our list, please contact us.

For optimal voice quality, we recommend the following setup: The device or devices in this section are our current recommendations.

Please note that this section can change over time as new information becomes available.

Current Status: Staff Recommendation Suggestions: Suitable for offices of all sizes; unmanaged switch suggested for deployments requiring more ports.

If bridging is not possible either, you must replace this device as it will prevent you from using our service.

Current Status: Compatible after Changes, Hardware Revision B Only Suggestions: Disable SIP ALG Comments: This applies to Hardware Revision B only.

This device is not believed to offer Qo S which may be a drawback in certain deployments.